Today, there is an EX3 machine found clear, the effect is good

Reprinted:
Epson printer zeroing program usage and manual zeroing method SSC Service Utility 4.1
Epson printer zeroing program usage and manual zeroing method SSC Service Utility 4.1
Model: 4.1
Introduction: Epson Inkjet Printer Cracking Software - "SSC Service Utility 4.0" for the following printers: Epson Stylus

Color400/440/480/580/480sxu Epson Stylus Color600/640/660/670/680 Epson Stylus Color777/740/760/800/850 Epson

Stylus Color400/860/880/900/980/ Epson Stylus Color1160/1520/3000 Epson Stylus Stylus C20/C40/C41/C42/C43/

C44/C45/C46/C50/C60/C61/C62/C63/C64/C65/C66/C70/C80/C82/C83/C84/C85/C86/CX3100/CX3200/CX4600/CX3500/CX3600/

Epson Stylus RX420/RX425/CX5100/ CX5200/CX5300/CX5400/CX6400/CX6600/ Epson Stylus

Photo/EX/Photo700/750/780/790/780C/ 810/820/825/915/830/830U/870/875DC/890/ 895/785EPX/900/925/935/950/960/

1200/1270/1280/1290/2000P/2100/2200 Epson Stylus R200/R210/R300/R310/R800 Epson Stylus/R1800/RX500/RX600/RX620

Symptom: Two red lights flash simultaneously
1, installation
(1) Double-click sscserve.exe to start the installation.
(2) Set the model
Click the SSC Service Utility icon and the main window will appear. Go to configuration, choose to install in Installed Printer and Print model

The type of printer.

2, close the main window
A printer icon appears in the lower right corner of the computer screen.
3, waste ink cotton is zero
Right click on the icon of the SSC Service Utility in the lower right corner of the computer screen
Protection Counter
Reset protection Counter
4, restart the printer
After you have finished zeroing, please turn off the printer, then turn the printer back on, and let the computer re-catch the printer before completing the zeroing procedure. This

At the same time, the phenomenon that the red light and the green light cross-blinking should have disappeared.
Some models require a manual zeroing procedure
1, turn off the printer
2, manual zeroing
3, restart the printer
Manual method for clearing various types of printers
1. Epson stylus color440/640/740/460/660/670/760/860/880/1160
Press and hold the LOAD/EJECT+CLEANING button, then hold the power button until the nozzle responds. Finally release all the keys. Press and hold after 2-3 seconds

CLEANING button. Until you see the machine reacting;
2, Epson stylus color 680
Press and hold the LOAD/EJECT+CLEANING button, then hold the power button until the nozzle responds. Until you see the ink indicator flashing and the paper coming out of the exit,

Finally release all the keys. Press and hold the CLEANING button after 2-3 seconds. Until you see the machine reacting;
3, Epson stylus Photo 785/895
Press and hold the MAINTENANCE+ROLL APER button, then hold the power button until the nozzle responds. You will see the indicator flashing and finally release all the keys.

Press and hold the ROLL APER button for 2-3 seconds until 12-13 seconds. Until the indicator light flashes;
4, Epson stylus photo 890/1280/1290
Press and hold the MAINTENANCE+ROLL APER button, then hold the power button until the nozzle responds. You will see the power indicator flashing and finally release all

key. Press and hold the ROLL APER button for 2-3 seconds until 12-13 seconds. Until the indicator light flashes.
Third, manual zeroing method
Suitable for epson ex/ex2/ex3
Manual method: In case of power failure, press and hold the paper feed button and the cleaning button, and the paper feed button flashes 2-3 times, then release the hand, then press the cleaning button for about 13 seconds.

The indicator will flash together and go out, the problem is solved.